TG415 - Design and Major Repair of Steam Turbines

| Print |

4.5 days - 2.9 Continuing Education Units Awarded

Course Dates Download Brochure PDF
USD 3,295.00

This Seminar is designed for power generation engineers, operations superintendents and maintenance superintendents familiar with steam turbine components and the most basic steam turbine design theory.  The Seminar is extremely helpful for those engineers who want to become familiar with turbine design and also desire to “take charge” of steam path upgrades, modifications and/or major maintenance and to learn those penetrating questions and evaluate the contractors answers, all based on “knowledge gained”.  The Seminar is scheduled for 4.5 days of classroom work; each topic is covered in sufficient detail in class.  The attendee is also directed toward independent study using several textbooks, detailed Seminar notes and a list of references included with the Seminar.  Depending on the number of attendees, there may be some opportunity to discuss case studies with which the instructor has experience or problems attendees may have and which are of interest to all attendees.
Upon completion of this Seminar the participant will be sufficiently familiar with the design of large utility steam turbines to participate in or lead major maintenance projects, steam path upgrades and/or modifications which commonly required as part of service life extension programs for fossil fired or nuclear power plants.  The participant will be better equipped to discuss design details with the original equipment manufacturer or the supplier of the steam path upgrade or modification.

This Seminar is designed for engineers who are new the power generation or those that are considering upgrades.
Seminar OUTLINE:
    1. The Carnot Cycle
    2. The Rankine Cycle
    3. The Steam Reheat Cycle
    4. Regenerative Feedwater Heating
    5. The Power Cycle - Mollier Diagram
    6. Cycle and Unit Efficiency
    7. Losses in the Steam Path
    8. Steam Path Deterioration
    9. Stage Velocity Ratio
    10. Turbine Steam Path Arrangements
    11. Valve Arrangements
      1. Partial Arc (Throttle Control)
      2. Full Arc (Nozzle Control)
    12. Initial Steam Conditions
    13. Reheat Section Steam Conditions
    14. Intermediate Pressure Section Steam Conditions
    15. Turbine Exhaust Pressure
    16. The Effects of Internal Moisture Separation
    17. The Removal of Feedwater Heaters from Service
    18. The Power Cycle Heat Balance
    1. The Blade Profile
    2. Blade Profile Pitching
    3. Vane Profile Design
    4. Determination of Profiles
      1. Impulse Profile of Constant Width Channel
      2. Impulse Profile with Converging Channel
      3. Aerodynamic Profile
    5. Blade Profile Variation with Vane Height
    6. Blades with Constant Profile
    7. Straight Generated Profiles
    8. Vortex or Twisted Profiles
    9. Passage Flow Capacity
    10. Radial Variation of Stage Parameters
    1. Centrifugal Stress
    2. Modification of Simple Stress Diagram
      1. Root Blending Radius
      2. Lacing or Tie Wire
      3. Tip Thickening for Shroud Attachment
      4. Tip Thinning
      5. Leading Edge Erosion Shield
    3. Vane Bending Stresses
    4. Steam Bending Effects
    5. Centrifugal Bending Effects
    6. Blade Vibratory Stresses
    7. Blade Thermal Stresses
    1. Concepts Affecting Design Clearances
      1. Rotor Deflection
      2. Differential Expansion
      3. Radial Expansion of Steam Path Components
      4. Diaphragm Deflection at Pressure and Temperature
    2. Steam Path Area Relationships
    3. Steam Path Component Alignment
      1. Rotor Assembly and Requirements
      2. Diaphragm or Fixed Blade Row
    4. Circumferential Alignment Requirements
    5. Leakage Areas
    6. Steam Turbine Foundations
    7. Steam Turbine & Generator Line Out and Erection
      1. Lower Half Casing and Initial Bearing Adjustment
      2. Adjustment of Inner Casing
      3. Installation of the Diaphragms
      4. Tops on Alignment
      5. Installation of the Rotor in the Casing
      6. Measurement of Coupling Settings
    8. Alignment and Leveling Methods
      1. Center Line Wire Method
      2. Laser Method
    1. Functions of the Root
    2. Root Forms
      1. Axial Entry
      2. Radial Entry
      3. Tangential Entry
    3. Blade Root Platforms
    4. Blade Root Variation in Pitch
    5. Root Load Bearing Surface Curvature
    6. Tangential Entry Closing Blades
      1. The Closing Window
      2. Closure of the Window
    7. Pinning of Radial Entry Roots
      1. Blade Radial Positioning
      2. Tangential Placement
      3. Root Ligament Clearance
    8. Root Side Grips of Tangential Entry Blades
    9. Unequal Load Sharing within Blade Roots
      1. Radial Entry Type
      2. Axial Entry Type
      3. Tangential Entry Type
    10. Incorrect Radial Alignment of Rotor Blades
    11. Factors Influencing Blade Pitch Errors
    12. Blade Root Operational Problems
      1. Fatigue Failure in the Root
      2. Root Side Grips
      3. Root Fillet Radii
      4. Corrodents in the Root
      5. Tangential Entry Closing Blade Root Growth
    13. Blade Root Steeples
      1. Remedial Action
    1. Radial Entry (Pinned Root Form)
    2. Tangential Entry Form
    3. Axial Entry Form
    4. Closing Blades and Windows
    5. Considerations of the Blade Root Transfer Surface
    1. Functions of the Cover Band and Tie Wires
    2. Types of Tie and Lacing Wires
      1. Wire Cross Sections
      2. Continuous Wires
      3. Wire Ends
      4. Integral Wire
      5. Staggered Wire
    3. Types of Cover Bands/Shrouding
      1. No seal
      2. Axial seal
      3. Radial seal
      4. Axial seal and Radial platform
      5. Radial seal platform
      6. Special design bands
    4. Tenons and their Attachment by Riveting
      1. Types of Tenons
      2. Tenon and Hole Requirements
      3. The Rivet
    5. Shaping of Shroud Band Ends
    6. Cover Band Manufacture
    7. Riveting
    1. Rotor Construction
      1. Monoblock/Integral
      2. Built up
      3. Welded
    2. Function of the Rotor
    3. Rotor Heat Treatment
    4. Inspection of Rotor Bores
    5. Inspection of the Forging
    6. Critical Speed
    7. Vibration of Turbine Rotors
    8. Rotor Thermal Stabiltiy
    9. Rotor Stresses
    10. Rotor Temperature Control
    11. Turbine Rotor Discs
      1. Functions of the Disc
      2. Types of Discs
      3. Assembly of Discs on Shaft
      4. Disc Removal
      5. Disc Stresses
      6. Keyways and Securing
      7. Overspeed Testing
    1. Function of Fixed Blades and Diaphragms
    2. Diaphragm Construction and Manufacture
    3. Built up Fixed Blade Rows
    4. Diaphragm Stresses and Material Evaluation
    1. Prediction of Blade Frequencies
    2. Sources of Vibration Stimulus
    3. General Equation for Blade Frequencies
    4. Torsional Vibration
    5. Correction Factors for Natural Frequency
    6. The Campbell Diagram
    7. Nozzle Impulse Effects
      1. Partial Admission
      2. Steam Force Diagram
      3. Nozzle Passing Effect
    8. Blade Off-Frequency Operation
    1. Pressure Staging and Multiple Shells/Cylinders
    2. Functions of the Cylinders/Shells
    3. Thermal Gradient and Shell Design
    4. Estimating Low Cycle Fatigue Life
    5. Shell Manufacture
    6. Shell Casting Defects
    7. Steam Inlet Connection Points of the Casings
    8. Steam Nozzle Boxes
    1. Alloying Elements
    2. Mechanical Properties of Turbine Materials
      1. Tensile Strength
      2. Yield Strength
      3. Ductility
      4. Hardness
      5. Impact Strength
      6. FATT
      7. Modulus of Elasticity
      8. Modulus of Rigidity
      9. Fatigue Strength
      10. Creep Rupture
      11. Poisson's Ratio
      12. Resistance to Corrosion
      13. Coefficient of Thermal Expansion
      14. Diffusivity
      15. Thermal Conductivity
    3. Rotor Forging Material
    4. Turbine Disc or Wheel Material
    5. Blading Materials
      1. Precipitation Hardening Steel for Blades (17-4PH)
      2. Titanium Alloy for Blades
    6. High Pressure and Temperature Casings